Best Multimeter For Electronics – Guide & Reviews

Like any other products, choosing the best multimeter for electronics is a task that has it's challenges. We can reduce those challenges with the help of a professional.

Now that is my job here to reduce the challenging nature of selecting the best multimeter for electronics. I would not say that the manufacturers make bad products, I would say that they make products to meet the different levels of market demand.

At such a time they are forced to make cheap multimeters that are functional but not as good as the high-end ones. The choice of your multimeter will mostly have to do with your level of professionalism.

There is no point in a learner buying a high-end multimeter. They will possibly not use all the features and under using a multimeter is equivalent to wasting money on things you do not need.

Consideration : Best Multimeter For Electronics

The best multimeter should be able to meet your needs by the following factors. These factors will help you in knowing the best multimeter for electronics for you.

​Top Five Best Multimeter For Electronics

​Below is a list of the multimeters that will meet your need at the different levels of professionalism. The best multimeter for electronics from this point onwards will be more of a relative relationship.


Ranging is the selection of the functions. For example, when measuring resistances, an auto ranging multimeter will detect its resistance and give you the correct reading and so for capacitance and even diodes. A manual ranging multimeter will require that you select the functions.


Accuracy is the ability of the multimeter to give readings that are closest as possible to the actual reading.

If you need to use for Do it yourself tasks, then you can afford to sacrifice some accuracy. For industrial applications, you need the highest of sensitivity and accuracy.


Protective measures for a multimeter are such features as the fuse. I prefer HRC fuses over glass fuses.

Other things that make for safety are the blinking LED that shows you the right terminal to connect the probe according to the function that you select.


The design will give for ease of use and the durability of your multimeter module. Compact design allows for one hand operation.

Such other design feature is the slim ergonomic design. Also, some multimeter uses the clamp on conductor feature to measure the current for example without having to rip off the wires.


The budget consideration is an automatic consideration, most of the time we do not have much of choice.

We make compromises so we can get the products we want. As you make the compromise ensure that you get the best multimeter for the price.

​Recommended Best Digital Multimeters

Extech EX330 Autoranging Mini Multimeter

Editor Rating:

Extech EX330 Autoranging Mini Multimeter offers you as the user with a lot of amazing features that make it such a functional module.

Extech EX330 Autoranging Mini Multimeter measures both AC and DC voltage up to 600 V, and up to 10 Amps of current.

When testing for continuity the multimeter has an audible beeper that promptly notifies you there is continuity.

The Extech EX330 Autoranging Mini Multimeter also measures resistance, and you can use it to carry out diode tests.

To conserve on the battery, the multimeter has an auto shutoff that shuts the after 15 minutes. It will never reach a time that the multimeter goes off without notice, thanks to the low battery indicator.

The 1-inch digits display is excellent. It gives you the ability to measure capacitance, frequency, duty cycle, and temperature. The temperature measurements are in both Fahrenheit and degree Celsius.

The temperature functionality uses a type K temperature probe.Extech EX330 Autoranging Mini Multimeter has a non-contact AC voltage detector that detects voltage on the live wire at proximity.

It has two types of data hold. The max data hold and random data hold. You can condition it to hold the maximum value, or you can hold a random reading using the hold button.


  • Non-contact AC detector
  • Large one-inch digits
  • Data hold
  •  Auto ranging
  • Auto power off
  • Battery low indicator

Technical Details

  • Weight: 1.1 pounds
  • Dimensions: 5.7 x 1.6 x 2.9 inches
  • Origin: China
  • Special Features: Portable
  • Power Source: Battery 


    • Glass fuses cannot take the maximum rating of 600 V

Fluke 116 HVAC Multimeter

Editor Rating:

From the price you can tell that this multimeter is a professional grade type of meter. The Extech EX330 Autoranging Mini Multimeter suits HVAC as we will see.

It has a low amperage rating of 600µA. Also, it has a built-in temperature sensor that facilitates for fast and easy troubleshooting of HVAC systems.

The multimeter is compatible with a magnetic handle. So as much as it does not come with one, the compatibility with one compensates for that. The design is compact hence it allows for one hand operation.

Most of the multimeters get a challenge with ghost voltages. The Extech EX330 Autoranging Mini Multimeter has a low input impedance that filters out the ghost voltages thus avoiding false readings.

You get accurate readings at all the time.Fluke backs up the quality of their multimeters with a three-year warranty that you can rely on. Its usability ranges from continuity, frequency, resistance, and capacitance measurements.


  • Built-in thermometer
  • Low input impedance
  •  White LED backlight
  • Compact ergonomic design
  • Compatible with TPAK magnetic hanger
  • Three years warranty

Technical Details

  • Weight: 1.2 pounds
  • Display Type: LED
  • Dimensions: 12.2 x 10.5 x 3.8 inches
  • Power Source: Battery 
  • Battery Quantity: 1


  • Best applicable for HVAC only

Fluke 323 True-RMS Clamp Meter

Editor Rating:

Fluke 323 True-RMS Clamp Meter is a very fine piece of innovation. Did you know that you do not have to rip off the circuit to measure current?

That is now possible using this multimeter clamp. You just clamp around the specific wire and voila!

You have got a reading. You will have to ensure that you do not clamp on two wires as in the case of an extension. The two currents will simply cancel out.

The Fluke 323 True-RMS Clamp Meter can measure current up to 400 A. that means it can find application for both DIY and commercial use.

The internal noise filter circuit makes it ideal to measure unbalanced loads. It makes for highly reliable readings. For ease of use, it uses a slim ergonomic design that allows for one hand operation.

For continuity testing, there is an audible sound that enables you not always to have eyes on the display.

It passes the IEC safety standard test. For CAT IV installations it is rated at 300V and 600V for CAT III installations. It has a two years warranty.


  • Two years warranty
  • Certifies IEC safety standards
  • Inbuilt noise filter
  • Clamp on circuit current measurement design
  •  Audible continuity sensor
  • Measures current up to 400A

Technical Details

  • Weight: 4.8 ounces
  • Display Type: LED
  • Dimensions: 2 x 10 x 5 inches
  • Origin: USA
  • Power Source: Battery 
  • Folding: No


  • The leads are kind of loose
Mini MS8232 Auto-Ranging Backlit LCD

Editor Rating:

Do you want to carry out basic tests in the house? And I do not mean like testing whether there is current in a line.

You can simply do that using a tester and spare yourself the extra cost.I mean testing like diodes and a couple of capacitors. Like this one time, I had to repair my amp music system.

What you need is a Dr.meter Mini MS8232 Auto-Ranging Backlit LCD Digital Multimeter. The multimeter is super sensitive, which is not much a problem. You will always be able to tell out actual power readings from ionized air.

You will also be able to utilize the non-contact voltage sensor feature. For dim environments an LCD backlit, and digital work light illuminates for you.

Dr.meter Mini MS8232 Auto-Ranging Backlit LCD Digital Multimeter has continuity buzzers and auto ranging. The package comes with two AA batteries and a user manual ready for use.

The built in leads help novices with not having to struggle to get the leads terminals right. Also, there is no possibility of ever losing the leads.


  • Built in leads
  • High response time
  • LCD backlit
  • Digital work area light
  • Auto ranging
  • Non-contact voltage sensor

Technical Details

  • Weight: 7.2 ounces
  • Display Type: LCD
  • Dimensions: 5.8 x 3.7 x 1.5 inches
  • Power Sources: AC/DC
  • Battery Required: No


  • The built in leads limit you from using any other leads
Mastech MS8268 MS8261 Series Digital AC

Editor Rating:

With a 4.4 stars rating and a whole lot of review, it is an incredible multimeter for the budget. The protective jacket prevents damage whenever it meets the floor from a height.

Using it is pretty easy, and it is a guarantee to always get the correct readings.

Whenever you connect the leads incorrectly, a beep warning sound goes on. When you select the measurement function, the Terminals blink to tell you the correct terminal to connect the probe.

It has both auto and manual ranging and allows for measurement of all parameters. It has an auto power off that you can choose to disable.

The LCD display has a LED backlit. You can measure both AC and DC voltages up to 1000V. At the back of the meter, there is a built-in lead storage compartment.

The selector dial rotates incredibly well. The manufacturer gives you a one year warranty for the multimeter.


  • One year warranty
  • Blink feature for correct terminals connection
  • Leads storage compartment at the back
  • Blue LED backlit
  • Auto power off
  • Auto and manual ranging

Technical Details

  • Weight: 14.1 ounces
  • Origin: China
  • Dimensions: 7.7 x 1.7 x 3.6 inches
  • Power Sources: Battery
  • Battery Required: Yes
  • Batteries: 3 AAA batteries


  • The LED backlit does not stay on for long enough

Final Verdict

From this review, we see instances where we need first determine the application of the multimeter. You are sure to find a multimeter that meets your budget and your application needs.

The above-listed multimeters range from those for use for DIY tasks and professional use in industrial situations. They are durable and functional models that will give you value for your money at the end of the day. Weigh what you need and the qualities the individual multimeters have to offer and then make a choice.

Joe Carrow

Product reviewer & passionate blogger. Beside writing for this blog, I spend my time crafting research based contents for HuffingtonPost, Lifehacker & Forbes!

Click Here to Leave a Comment Below 0 comments